How to Reset Your Canon IP2770 Printer with Service Tool V3400

Encountering errors with your Canon IP2770 printer can be frustrating. Sometimes, these issues require a reset to get your printer back in working order. While Canon provides a tool to help with this process, known as the Canon IP2770 resetter or Service Tool, many users are unfamiliar with how to use it effectively.

This guide will walk you through the process of resetting your Canon IP2770 printer using the Service Tool V3400. We’ll provide clear, step-by-step instructions, complete with images, to help you perform the reset yourself. This method can be particularly useful for resolving common errors like the Canon IP2770 error 5B00, among others.

Understanding When to Reset Your Canon IP2770

Before diving into the reset process, it’s helpful to understand when a reset is necessary. Common scenarios that might require you to reset your Canon IP2770 include:

• Error Messages: Your printer displays error codes on its screen or through blinking lights, indicating a problem that a simple restart can’t fix.
• Ink Absorber Full Error (e.g., 5B00): This error often signals that the printer’s ink absorber is full and needs to be reset.
• Persistent Printing Problems: Issues like the printer refusing to print, printing blank pages, or consistently jamming paper, even after troubleshooting basic causes.

If you’re experiencing any of these problems, resetting your printer using the Service Tool might be the solution.

Preparing for the Reset Process

Before you begin the reset procedure, there are a few preparatory steps to ensure a smooth process.

Download the Service Tool V3400

The essential tool for resetting your Canon IP2770 is the Service Tool application. While there are different versions available, this guide specifically focuses on Service Tool V3400, known for its compatibility and effectiveness.

You can typically find the Service Tool V3400 online through various file-sharing websites or printer repair resources. When downloading, ensure you are getting it from a reputable source to avoid any potential malware.

Enter Service Mode on Your Canon IP2770

To allow the Service Tool to communicate with your printer and perform the reset, you need to put your Canon IP2770 into Service Mode. Follow these steps carefully:

1. Turn off your printer. Make sure the printer is completely powered down.

2. Press and hold the Resume button, then press and hold the Power button. Keep both buttons pressed.

3. Release the Resume button but continue holding the Power button.

4. Press the Resume button 5 times. Each press should be a quick press and release.

5. Release both the Power and Resume buttons simultaneously.

   The indicator light should now be blinking green, indicating that your Canon IP2770 is in Service Mode. Your computer may recognize the printer as a new device at this point, which is normal.

Ensure Printer Has Paper

Before proceeding with the reset, make sure your Canon IP2770 has paper loaded. This is because the printer will perform a test print during the reset process to confirm its success. A few sheets of paper are sufficient.

Step-by-Step Guide to Resetting Canon IP2770 with Service Tool V3400

Now that you have prepared your printer and downloaded the necessary tool, you can proceed with the reset using Service Tool V3400.

1. Extract the Service Tool V3400 file. Locate the downloaded Service Tool V3400 file and extract its contents to a folder on your computer.

2. Run the Service Tool application. Open the extracted folder and double-click on the Service Tool V3400 application file to launch it.

3. Set the Absorber Counter to Main. In the Service Tool V3400 interface, find the “Clear Ink Counter” section. In the dropdown menu labeled “Absorber,” select “Main.” Then, click the “Set” button next to it.

4. Confirm the Ink Absorber Counter Reset. After clicking “Set,” the printer should perform a print job and output a page with “D=000*0” printed on it. This indicates the main ink absorber counter has been reset.

5. Reset the Ink Absorber Counter again under “Ink Absorber Counter”. In the “Ink Absorber Counter” section, again select “Main” from the “Absorber” dropdown menu and click “Set”.

6. Verify Function Completion. A pop-up message “A function was finished” should appear. Click “OK” to close the message.

7. Perform EEPROM Clear. Navigate to the “EEPROM Clear” section in the Service Tool and click the “EEPROM Clear” button.

8. Execute EEPROM Print. Click the “EEPROM” button in the Service Tool. A new window might appear; leave the default settings (Paper = Rear Tray) and click “OK.” The printer will perform another automatic print job.

9. Check the EEPROM Print Result. Examine the printed page. Look for the line “TPAGE(TTL=00000)”. The numbers after TTL may vary, but the important part is that it’s reset. This confirms the EEPROM reset was successful.

Restarting Your Canon IP2770 Printer

After completing the reset process in the Service Tool, the final step is to restart your Canon IP2770 printer. Simply turn off the printer and then turn it back on again.

Your Canon IP2770 printer should now be reset and functioning correctly. To verify, try printing a test document from your computer.

This guide provides a comprehensive approach to resetting your Canon IP2770 printer using the Service Tool V3400. By following these steps, you can often resolve common printer errors and restore your printer to its optimal working condition.